Mackie DL32R 32-channel Rackmount Digital Mixer


Mackie DL32R 32-channel Rackmount Digital Mixer 32-channel Touch Software-controlled Rackmounted Digital Mixer with 28 Buses, 14 Stereo-linkable Aux Sends, 32 x 32 USB 2.0 Audio Interface, 32 Onyx+ Microphone Preamps, Multitrack Recording/Playback, and Onboard Digital Effects - 32-channel Wireless Digital Mixer with iPad Control - Ditch the Snake Wireless mixing lets you control everything from anywhere Leave that bulky snake at home! Because you can control the Mackie DL32R with your iPad, you can place it anywhere. Even if you put the DL32R onstage, you'll still be free to walk around the venue to fine-tune your mix, ensuring that every member of your audience experiences optimal sound quality regardless of where they're sitting. Also, because the DL32R supports up to 10 separate iOS devices at once, multiple engineers can work together from a single DL32R, making tweaks from their various vantage points. You can even set up personal monitor mixes for each performer that they can tweak via any iOS-compatible device. Back in the day, you would've needed miles of cable and a pile of submixers to pull off this much signal routing. Thankfully, with the DL32R in your rack, all you need is an iPad and your fingers! Complete control from your iPad Use 10 separate iOS devices at once Set up personal monitor mixes - Plenty of I/O All your connections are covered With the Mackie DL32R in your live rig, you'll never run short of I/O. Providing you with 32 clean, full-sounding Onyx+ mic preamps, 14 fully assignable XLR outputs, a pair of TRS monitor outputs, and a stereo AES digital output, the DL32R has all of your I/O needs covered. On top of that, you also get 28 buses, 14 stereo-linkable aux sends, a headphone output, and a slot for a Dante Expansion Card. And best of all, the revolutionary DL32R gives you total recall of all your settings! 32 recallable Onyx+ mic preamps 14 fully-assignable XLR outputs TRS monitor outputs and stereo AES output - Multitrack Recording and Playback Direct-to-disk recording and USB 2.0 connectivity One of the Mackie DL32R's most useful features is its multitrack recording and playback capabilities. You can either record directly to a USB 2.0 hard drive or use the DL32R as an audio interface for your Mac or PC, giving you the ability to record straight to your DAW of choice. Record directly to an external hard drive Use as a USB 2.0 audio interface Wireless control over all direct-to-disk recording/playback - Loaded with Onboard DSP Create polished, professional-sounding mixes Packed with DSP, the Mackie DL32R gives you 36 input channels with a 4-band parametric EQ, highpass filter, noise gate, and compression, as well as 28 output buses with a 4-band parametric EQ, highpass and lowpass filters, 31-band graphic EQ, compressor/limiter, and alignment delay. On top of that, you also get onboard delay and reverb! With three stereo FX processors with dedicated sends and returns, full I/O routing with A/B sources per channel, and modern and vintage options for each processor, you'll be churning out mixes that sound remarkably polished and professional. Onboard EQ, filters, compression, delay, and reverb Modern and vintage options for each effect - Powerful Digital Mixing A large-format console in the palm of your hand The Mackie DL32R gives you 32 channels of powerful digital mixing controlled wirelessly from the extremely intuitive Master Fader iPad app. With total wireless control over everything, including fully-loaded DSP and direct-to-disk multitrack recording and playback, the DL32R is designed for live sound engineers who demand professional quality and want the flexibility of wireless mixing. So, whether you work in a theater, house of worship, or concert hall — if you're serious about live sound, you owe it to yourself to check out the innovative DL32R by Mackie! - Tech Specs Type: Digital Channels: 32 Inputs - Mic Preamps: 24 x XLR, 8 x XLR/TRS Combo Phantom Power: 32 x Channels Outputs - Digital: 1 x AES/EBU (XLR) Outputs - Main: 14 x XLR (Assignable) Outputs - Other: 2 x TRS (Monitor) Aux Sends: 14 x Stereo-linkable Busses/Groups: 28 x Bus Data I/O: 1 x Ethernet (WiFi Router Not Included) USB: 1 x Type B, 1 x Type A Computer Connectivity: USB (32 x 32) I/O Expansion Slots: 1 x Slot (Dante Expansion Card) Headphones: 1 x 1/4" Faders: Virtual EQ Bands: 4-band Parametric, 31-band Graphic Effects: Yes Software: Master Fader 5 Control App (iOS 11 or later, Android 6.0 or later, macOS 10.2, Windows 10) Rackmountable: Yes Height: 5.4" Depth: 17.5" Width: 19" Weight: 18 lbs. Manufacturer Part Number: 2045880-00


$1600 
  • Brand: Mackie
  • Shipping:  
  • Return Policy: To serve you better, we have 90 days return policy on all products. INFO: business@mymuziqs.com

Product Description


Mackie DL32R 32-channel Rackmount Digital Mixer


32-channel Touch Software-controlled Rackmounted Digital Mixer with 28 Buses, 14 Stereo-linkable Aux Sends, 32 x 32 USB 2.0 Audio Interface, 32 Onyx+ Microphone Preamps, Multitrack Recording/Playback, and Onboard Digital Effects



-  32-channel Wireless Digital Mixer with iPad Control




-  Ditch the Snake

Wireless mixing lets you control everything from anywhere

Leave that bulky snake at home! Because you can control the Mackie DL32R with your iPad, you can place it anywhere. Even if you put the DL32R onstage, you'll still be free to walk around the venue to fine-tune your mix, ensuring that every member of your audience experiences optimal sound quality regardless of where they're sitting. Also, because the DL32R supports up to 10 separate iOS devices at once, multiple engineers can work together from a single DL32R, making tweaks from their various vantage points. You can even set up personal monitor mixes for each performer that they can tweak via any iOS-compatible device. Back in the day, you would've needed miles of cable and a pile of submixers to pull off this much signal routing. Thankfully, with the DL32R in your rack, all you need is an iPad and your fingers!


Complete control from your iPad

Use 10 separate iOS devices at once

Set up personal monitor mixes





-  Plenty of I/O

All your connections are covered

With the Mackie DL32R in your live rig, you'll never run short of I/O. Providing you with 32 clean, full-sounding Onyx+ mic preamps, 14 fully assignable XLR outputs, a pair of TRS monitor outputs, and a stereo AES digital output, the DL32R has all of your I/O needs covered. On top of that, you also get 28 buses, 14 stereo-linkable aux sends, a headphone output, and a slot for a Dante Expansion Card. And best of all, the revolutionary DL32R gives you total recall of all your settings!


32 recallable Onyx+ mic preamps

14 fully-assignable XLR outputs

TRS monitor outputs and stereo AES output





- Multitrack Recording and Playback

Direct-to-disk recording and USB 2.0 connectivity

One of the Mackie DL32R's most useful features is its multitrack recording and playback capabilities. You can either record directly to a USB 2.0 hard drive or use the DL32R as an audio interface for your Mac or PC, giving you the ability to record straight to your DAW of choice.


Record directly to an external hard drive

Use as a USB 2.0 audio interface

Wireless control over all direct-to-disk recording/playback





-  Loaded with Onboard DSP

Create polished, professional-sounding mixes

Packed with DSP, the Mackie DL32R gives you 36 input channels with a 4-band parametric EQ, highpass filter, noise gate, and compression, as well as 28 output buses with a 4-band parametric EQ, highpass and lowpass filters, 31-band graphic EQ, compressor/limiter, and alignment delay. On top of that, you also get onboard delay and reverb! With three stereo FX processors with dedicated sends and returns, full I/O routing with A/B sources per channel, and modern and vintage options for each processor, you'll be churning out mixes that sound remarkably polished and professional.


Onboard EQ, filters, compression, delay, and reverb

Modern and vintage options for each effect




- Powerful Digital Mixing

A large-format console in the palm of your hand

The Mackie DL32R gives you 32 channels of powerful digital mixing controlled wirelessly from the extremely intuitive Master Fader iPad app. With total wireless control over everything, including fully-loaded DSP and direct-to-disk multitrack recording and playback, the DL32R is designed for live sound engineers who demand professional quality and want the flexibility of wireless mixing. So, whether you work in a theater, house of worship, or concert hall — if you're serious about live sound, you owe it to yourself to check out the innovative DL32R by Mackie!





- Tech Specs


Type:    Digital

Channels:    32

Inputs - Mic Preamps:    24 x XLR, 8 x XLR/TRS Combo

Phantom Power:    32 x Channels

Outputs - Digital:    1 x AES/EBU (XLR)

Outputs - Main:    14 x XLR (Assignable)

Outputs - Other:    2 x TRS (Monitor)

Aux Sends:    14 x Stereo-linkable

Busses/Groups:    28 x Bus

Data I/O:    1 x Ethernet (WiFi Router Not Included)

USB:    1 x Type B, 1 x Type A

Computer Connectivity:    USB (32 x 32)

I/O Expansion Slots:    1 x Slot (Dante Expansion Card)

Headphones:    1 x 1/4"

Faders:    Virtual

EQ Bands:    4-band Parametric, 31-band Graphic

Effects:    Yes

Software:    Master Fader 5 Control App (iOS 11 or later, Android 6.0 or later, macOS 10.2, Windows 10)

Rackmountable:    Yes

Height:    5.4"

Depth:    17.5"

Width:    19"

Weight:    18 lbs.

Manufacturer Part Number:    2045880-00