Mackie DL32S 32-channel Rackmount Digital Mixer


Mackie DL32S 32-channel Rackmount Digital Mixer 32-channel Digital Rack Mixer with Integrated 32-in/32-out USB 2.0 Audio Interface, 32 Mic Preamps, 32 Input Channels, 15 Output Buses, 6 VCAs, 6 Mute Groups, 4 Stereo FX Processors, and Built-in Wi-Fi Networking - 32-channel Rack Mixer with Built-in Wi-Fi Put a Mackie DL32S in your rack, and you can mix from anywhere. All you need is an iPad and Mackie's Master Fader control app. 32 great-sounding Onyx+ mic preamps and onboard FX ensure a great-sounding performance. The DL32S also functions as a 32-in/32-out USB interface, so you can record the show then mix it later in the studio. You can also play back a full multitrack recording for a virtual sound check. The DL32S supports up to 20 iPads at once, so multiple engineers can work from one mixer. And with built-in Wi-Fi networking and instant recall of every setting, setup is a snap. The DL32S gets you into your mix like never before. - Control everything from anywhere with wireless mixing Leave that bulky snake at home! Because you can control the Mackie DL32S with your iPad, you can place it anywhere. Even if the DL32S is onstage, you can walk around the venue to fine-tune your mix. It's a great way to ensure optimal sound quality for every member of your audience. And because the DL32S supports up to 20 iPads at once, multiple engineers can work from one DL32S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would've needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL32S in your rack, all you need is an iPad and your fingers! - All your connections are covered With the Mackie DL32S in your live rig, you'll never run short of I/O. Providing you with 32 stereo-linkable input channels, 10 fully assignable XLR outputs, and 32 great-sounding Onyx+ mic preamps, the DL32S has your I/O needs covered. Of the 32 input channels, 16 are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs. On top of that, you also get 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output. And best of all, the DL32S gives you total recall of your settings! - Integrated USB 2.0 audio interface One of the Mackie DL32S's most useful features is multitrack recording and playback. Use the DL32S as an audio interface to record straight to your DAW. Play intermission music, backing tracks, and more. Play back your full multitrack recording for a virtual sound check. You can also use your DAW's audio plug-ins in a live environment. The DL32S is a value-packed, high-channel-count studio recording solution. - Create polished, professional-sounding mixes Packed with DSP, the Mackie DL32S gives you 32 input channels with a 4-band parametric EQ, highpass filter, noise gate, and compression, as well as 15 output buses with a 4-band parametric EQ, highpass and lowpass filters, 31-band graphic EQ, compressor/limiter, and alignment delay. On top of that, you also get onboard delay, reverb, and modulation effects. With four stereo FX processors with dedicated sends and returns, full I/O routing with A/B sources per channel, and modern and vintage options for each processor, churning out polished, pro-quality mixes is no problem. - A large-format console in the palm of your hand The Mackie DL32S supplies 32 channels of powerful digital mixing. You get wireless control over everything, including its processing and routing, via Mackie's Master Fader control app. The DL32S is tailor-made for live sound engineers who demand flexible wireless mixing. So, whether you work in a theater, house of worship, or concert hall — if you're serious about live sound, you owe it to yourself to check out the DL32S. - Mackie DL32S Features: Ample I/O including 32 stereo-linkable input channels, 10 fully assignable XLR outputs, 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output 16 input channels are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs 32 recallable Onyx+ mic preamps deliver top-notch sound Wireless mixing allows you to take control of your mix via an iPad Tweak your mix, processing, and routing from anywhere in the venue Built-in Wi-Fi networking and instant recall ensure easy setup Supports up to 20 iPads at once to accommodate multiple engineers 4 onboard FX processors with dedicated sends and returns create polished, professional-sounding mixes 32-in/32-out USB interface for recording straight to your DAW Play intermission music, backing tracks, and more Play back your full multitrack recording for a virtual sound check Use your DAW's audio plug-ins in a live environment - Tech Specs Type: Digital Stage Box Mixer Channels: 32 Inputs - Mic Preamps: 16 x XLR, 14 x XLR-1/4" combo, 2 x XLR-1/4" combo (mic/line/Hi-Z) Outputs - Main: 2 x XLR (L/R, assignable), 8 x XLR (assignable) Aux Sends: 8 x Stereo Sends Busses/Groups: 6 x Stereo Sub Groups, 15 x Output Busses, 6 x Mute Groups Data I/O: 1 x RJ45 (external control) USB: 1 x Type B Computer Connectivity: USB (32 x 32), Wi-Fi Headphones: 1 x 1/4" EQ Bands: 4-band Parametric EQ, Highpass Filter Effects: 4 x Stereo FX Processors, Reverb, Delay, Chorus, Flange Signal Processing: Gate, Compressor Software: Master Fader 5 Control App (iOS 11 or later, Android 6.0 or later, macOS 10.2, Windows 10) Height: 7.3" Depth: 5.8" Width: 17.6" Weight: 8.8 lbs. Manufacturer Part Number: 2049000-00


$1075 
  • Brand: Mackie
  • Shipping:  
  • Return Policy: To serve you better, we have 90 days return policy on all products. INFO: business@mymuziqs.com

Product Description


Mackie DL32S 32-channel Rackmount Digital Mixer



32-channel Digital Rack Mixer with Integrated 32-in/32-out USB 2.0 Audio Interface, 32 Mic Preamps, 32 Input Channels, 15 Output Buses, 6 VCAs, 6 Mute Groups, 4 Stereo FX Processors, and Built-in Wi-Fi Networking




-  32-channel Rack Mixer with Built-in Wi-Fi


Put a Mackie DL32S in your rack, and you can mix from anywhere. All you need is an iPad and Mackie's Master Fader control app. 32 great-sounding Onyx+ mic preamps and onboard FX ensure a great-sounding performance. The DL32S also functions as a 32-in/32-out USB interface, so you can record the show then mix it later in the studio. You can also play back a full multitrack recording for a virtual sound check. The DL32S supports up to 20 iPads at once, so multiple engineers can work from one mixer. And with built-in Wi-Fi networking and instant recall of every setting, setup is a snap. The DL32S gets you into your mix like never before.




- Control everything from anywhere with wireless mixing


Leave that bulky snake at home! Because you can control the Mackie DL32S with your iPad, you can place it anywhere. Even if the DL32S is onstage, you can walk around the venue to fine-tune your mix. It's a great way to ensure optimal sound quality for every member of your audience. And because the DL32S supports up to 20 iPads at once, multiple engineers can work from one DL32S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would've needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL32S in your rack, all you need is an iPad and your fingers!







-  All your connections are covered

With the Mackie DL32S in your live rig, you'll never run short of I/O. Providing you with 32 stereo-linkable input channels, 10 fully assignable XLR outputs, and 32 great-sounding Onyx+ mic preamps, the DL32S has your I/O needs covered. Of the 32 input channels, 16 are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs. On top of that, you also get 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output. And best of all, the DL32S gives you total recall of your settings!





- Integrated USB 2.0 audio interface

One of the Mackie DL32S's most useful features is multitrack recording and playback. Use the DL32S as an audio interface to record straight to your DAW. Play intermission music, backing tracks, and more. Play back your full multitrack recording for a virtual sound check. You can also use your DAW's audio plug-ins in a live environment. The DL32S is a value-packed, high-channel-count studio recording solution.






-  Create polished, professional-sounding mixes

Packed with DSP, the Mackie DL32S gives you 32 input channels with a 4-band parametric EQ, highpass filter, noise gate, and compression, as well as 15 output buses with a 4-band parametric EQ, highpass and lowpass filters, 31-band graphic EQ, compressor/limiter, and alignment delay. On top of that, you also get onboard delay, reverb, and modulation effects. With four stereo FX processors with dedicated sends and returns, full I/O routing with A/B sources per channel, and modern and vintage options for each processor, churning out polished, pro-quality mixes is no problem.







-  A large-format console in the palm of your hand

The Mackie DL32S supplies 32 channels of powerful digital mixing. You get wireless control over everything, including its processing and routing, via Mackie's Master Fader control app. The DL32S is tailor-made for live sound engineers who demand flexible wireless mixing. So, whether you work in a theater, house of worship, or concert hall — if you're serious about live sound, you owe it to yourself to check out the DL32S.








-   Mackie DL32S Features:


Ample I/O including 32 stereo-linkable input channels, 10 fully assignable XLR outputs, 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output

16 input channels are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs

32 recallable Onyx+ mic preamps deliver top-notch sound

Wireless mixing allows you to take control of your mix via an iPad

Tweak your mix, processing, and routing from anywhere in the venue

Built-in Wi-Fi networking and instant recall ensure easy setup

Supports up to 20 iPads at once to accommodate multiple engineers

4 onboard FX processors with dedicated sends and returns create polished, professional-sounding mixes

32-in/32-out USB interface for recording straight to your DAW

Play intermission music, backing tracks, and more

Play back your full multitrack recording for a virtual sound check

Use your DAW's audio plug-ins in a live environment






-  Tech Specs




Type:    Digital Stage Box Mixer

Channels:    32

Inputs - Mic Preamps:    16 x XLR, 14 x XLR-1/4" combo, 2 x XLR-1/4" combo (mic/line/Hi-Z)

Outputs - Main:    2 x XLR (L/R, assignable), 8 x XLR (assignable)

Aux Sends:    8 x Stereo Sends

Busses/Groups:    6 x Stereo Sub Groups, 15 x Output Busses, 6 x Mute Groups

Data I/O:    1 x RJ45 (external control)

USB:    1 x Type B

Computer Connectivity:    USB (32 x 32), Wi-Fi

Headphones:    1 x 1/4"

EQ Bands:    4-band Parametric EQ, Highpass Filter

Effects:    4 x Stereo FX Processors, Reverb, Delay, Chorus, Flange

Signal Processing:    Gate, Compressor

Software:    Master Fader 5 Control App (iOS 11 or later, Android 6.0 or later, macOS 10.2, Windows 10)

Height:    7.3"

Depth:    5.8"

Width:    17.6"

Weight:    8.8 lbs.

Manufacturer Part Number:    2049000-00